PestControlLibrary
Menu
Active ingredient profile

Streptomyces lydicus

Bacterial biofungicide. FRAC places Streptomyces lydicus strain WYEC108 among the microbial strains in Group BM02, biologicals with multiple modes of action.[2]

Streptomyces lydicus WYEC 108 is a beneficial microbe and the active ingredient in Actinovate. Watered in, it grows on and around roots; sprayed on, it settles on foliage, where it guards plants against harmful fungi and bacteria.[1]

The label is the law. Read your product's label before you mix or apply; the rates here come from the labels listed under Sources.

Active ingredient
Streptomyces lydicus strain WYEC 108
Chemical class
Bacterial biofungicide. FRAC places Streptomyces lydicus strain WYEC108 among the microbial strains in Group BM02, biologicals with multiple modes of action.[2]
Mode of action
FRAC Group BM02: Biologicals with multiple modes of action: microbial strains (Streptomyces spp.)[2][1]
Signal word
Actinovate Soluble home and garden sublabel (sold as Actinovate Lawn & Garden or Actinovate for Lawn & Garden): Caution[1]

A living fungicide

The label describes the active ingredient as a microbe that colonizes the root system or foliage and protects it from harmful bacteria and fungi using several antifungal and antibacterial modes of action.[1]

Because it is alive, timing and storage matter. Apply it before disease or at the first sign, and keep the powder from overheating or freezing.[1]

Where it is used

For root diseases, water the mix into the pot or around the plant base until the soil is saturated without runoff. Start as early as seeding or transplanting, and repeat every 2 to 12 weeks.[1]

For leaf diseases, spray leaves, stems and new shoots to runoff, then repeat every 7 days as needed. Don't water foliage for 4 hours, and reapply after heavy rain.[1]

Don't mix it with chlorinated water, quaternary ammonia or hydrogen peroxide, which the label lists as restrictions.[1]

Use an opened package within 4 months and before its expiry date. Store it between 40°F and 77°F, out of sunlight and away from heat.[1]

Products and registrations

ProductRegistrantEPA Reg. No.Active %FormulationSignal word
Actinovate Soluble home and garden sublabel (sold as Actinovate Lawn & Garden or Actinovate for Lawn & Garden)[1]Novozymes BioAg, Inc.73314-200.037%water-soluble powder biofungicideCaution

Label rates

ProductUsePestsRate
Actinovate Soluble home and garden sublabel (sold as Actinovate Lawn & Garden or Actinovate for Lawn & Garden)Vegetables, fruits, nuts, flowers, roses, potted and foliage plants, trees and shrubsRoot rot and damping-off, club root, powdery and downy mildew, gray mold, black spot of rose, fire blight1–2 tsp product per 2 gallons of water[1]
Use the higher rate when disease pressure is heavy. One cup of mix usually treats one 6 inch pot as a drench.
Actinovate Soluble home and garden sublabel (sold as Actinovate Lawn & Garden or Actinovate for Lawn & Garden)Home lawnsBrown patch, dollar spot, take-all patch, gray and pink snow mold0.5–2 tsp product per gallon of water[1]
Start with 2 teaspoons per gallon, then drop to ½ teaspoon per gallon for maintenance. Spray 1 gallon of mix per 200 sq ft and soak the turf.

How to apply it, step by step

Steps for Actinovate Soluble / Actinovate Lawn & Garden (Streptomyces lydicus WYEC 108), home and garden sublabel, EPA Reg. No. 73314-20, taken from its label[1]. Other products with this active ingredient have their own labels; follow yours.

1. Protective gear

  • The home sublabel lists no specific gear: avoid getting it in your eyes, on your skin or on your clothing, avoid breathing the dust or spray mist, and wash with soap and water after handling.[1]

2. Before you spray

  • It is a beneficial soil microbe that suppresses root rots, damping-off and some lawn and leaf diseases on vegetables, fruit, nuts, flowers, houseplants, trees, shrubs and lawns.[1]
  • It works best applied early (at seeding, transplanting or potting) or before leaf disease appears; use opened product within 4 months and before the expiration date.[1]
  • Spray in calm weather when no rain is forecast for 24 hours, and keep it out of drains.[1]

3. Mixing

  • Garden plants: mix 1 to 2 teaspoons in 2 gallons of water (1 teaspoon is about 5 grams), the higher amount when disease pressure is high.[1]
  • Lawns: 10 teaspoons in 5 gallons per 1,000 sq ft by watering can; or, in a pump sprayer, 2 teaspoons per gallon for the first treatment and ½ teaspoon per gallon for maintenance, each gallon covering 200 sq ft.[1]

4. Applying

  • As a soil drench, water the pot, plant base or roots until the soil is saturated without runoff (about a cup for a 6-inch pot), ideally on damp soil; repeat every 2 to 12 weeks as needed.[1]
  • As a leaf spray, cover leaves, stems and new shoots to runoff and repeat every 7 days to protect new growth; reapply after heavy rain. A spreader-sticker helps coverage.[1]
  • On lawns, soak the turf so the solution reaches the roots without running off; repeat the maintenance rate every 4 to 8 weeks.[1]

5. After you spray

  • Don't water the foliage for 4 hours after a leaf spray.[1]
  • Rinse equipment over the treated area so rinse water doesn't run into drains.[1]

First aid

  • In the eyes, rinse slowly and gently for 15 to 20 minutes, removing contact lenses after the first 5 minutes; on skin or clothing, take off contaminated clothing and rinse for 15 to 20 minutes.[1]
  • If swallowed, call a poison control center or doctor right away, have the person sip water if they can swallow, and don't induce vomiting unless told to; if inhaled, move the person to fresh air. The label's emergency line is 1-800-222-1222.[1]

Storage, spills and disposal

  • Store it between 40°F and 77°F in a dry, cool place out of sunlight and away from heat, where children can't reach it; don't let it overheat or freeze.[1]
  • Keep it away from water, food and feed, and never pour unused product down a drain.[1]

From the safety data sheet

From the product's safety data sheet[3]. Where it and the label differ, the label is the law.

  • Novozymes' safety data sheet for Actinovate SP, a pale white powder containing 0.037% Streptomyces lydicus WYEC 108, uses the GHS signal word Warning for one hazard: the powder may form combustible dust concentrations in air. The product's EPA label uses CAUTION.[3]
  • The sheet says the product isn't expected to be a significant hazard in normal use and that Novozymes uses only non-pathogenic microorganisms. Very high levels of airborne spores may rarely cause breathing problems or an allergic reaction in sensitized people, it may affect people allergic to molds or fungi, and it says immunocompromised or immunosuppressed people shouldn't use it.[3]
  • For handling it recommends goggles or safety glasses, gloves and protective clothing, good ventilation, and approved respiratory protection wherever the dust could be breathed in. Wash hands with mild soap and water before eating, drinking or smoking.[3]
  • Keep it in the original, tightly closed container in a cool, ventilated place out of direct sunlight and away from heat, food and animal feed, at 40 to 85 degrees F. The sheet rates it stable for up to 6 months from the date of manufacture, says to use it before the expiration date on the package, and warns that disinfectants, fungicides and other biocides may inactivate it.[3]
  • Sweep or shovel a spill into containers while raising as little dust as possible, wash the area with plenty of water, and keep it out of sewers and public waters. Airborne dust that builds up can explode if it meets an ignition source.[3]
  • The sheet gives no ecological toxicity figures. It says not to apply the product directly to water or to areas where surface water is present, and it lists the product as not regulated for transport under DOT rules.[3]

Need the amount for your sprayer? Use the mixing calculator, which works from the same label rates.

Safety and environmental hazards

People

Signal word CAUTION. Avoid contact with eyes, skin and clothing, avoid breathing the dust or spray mist, and wash with soap and water after handling.[1]

Pets

The home sublabel gives no separate pet instructions. It says to store the product somewhere children can't reach.[1]

Bees and pollinators

The label has no bee or pollinator hazard statement.[1]

Fish and water

Don't let it enter or run off into storm drains, gutters, ditches or surface water. Rinse spray equipment over the treated area.[1]

Common questions

How much Actinovate per gallon of water?
For garden drenches and sprays, 1 to 2 teaspoons in 2 gallons of water. Lawns get 2 teaspoons per gallon at first, then ½ teaspoon for maintenance.[1]
Can I use Actinovate in hydroponics?
Yes. The label says to dissolve ½ to 1 teaspoon per gallon in the nutrient tank and reapply each time the nutrient water is changed.[1]
Is Actinovate organic?
The home sublabel carries the optional claims For Organic Gardening and For Organic Lawn Care. It can be applied up to and including the day of harvest.[1]

Sources

  1. U.S. EPA Pesticide Product Label System, “Actinovate Soluble master label label, EPA Reg. No. 73314-20 (EPA-stamped, Dec. 15, 2022).” www3.epa.gov/pesticides/chem_search/ppls/073314-00020-20221215.pdf (accessed 2026-10-06)
  2. Fungicide Resistance Action Committee, “FRAC Code List 2025.” www.frac.info/media/ljsi3qrv/frac-code-list-2025.pdf (accessed 2026-10-06)
  3. Novozymes BioAg (copy hosted by DoMyOwn), “Actinovate SP Biological Fungicide Safety Data Sheet (Novozymes BioAg, issued May 24, 2017, version 1.0; prints no EPA number, but EPA's record for Reg. No. 73314-20, the page's Actinovate Soluble label, lists Actinovate SP as an alternate brand name and shows the older 73314-1 transferred to 73314-20 on October 17, 2016).” www.domyown.com/msds/actinovate_sp_sds.pdf (accessed 2026-11-08)

Updated 2026-11-08. Built from sourced records; every rate traces to a product label. Spot an error? Tell us.