PestControlLibrary
Menu
Active ingredient profile

Sethoxydim

Cyclohexanedione (a 'DIM'); WSSA Group 1 acetyl-CoA carboxylase (ACCase) inhibitor. Broadleaf plants are naturally resistant to this class.[2][1]

Sethoxydim is a cyclohexanedione grass herbicide in WSSA Group 1, the ACCase inhibitors. Segment II uses it after weeds emerge to kill annual and perennial grasses in landscape beds, nurseries and centipedegrass or fine fescue turf. It does not touch broadleaf weeds or sedges. Poast herbicide has a separate residential-use section on its label for flower beds, shrubs, trees and listed fruits and vegetables, at 1 fl oz per gallon of water.[1][2][3]

The label is the law. Read your product's label before you mix or apply; the rates here come from the labels listed under Sources.

Active ingredient
Sethoxydim (CAS 74051-80-2)
Chemical class
Cyclohexanedione (a 'DIM'); WSSA Group 1 acetyl-CoA carboxylase (ACCase) inhibitor. Broadleaf plants are naturally resistant to this class.[2][1]
Mode of action
WSSA Group 1: ACCase inhibitors (cyclohexanediones, 'DIMs')[2][1]
Signal words
Segment II Herbicide: Warning[1]
Poast herbicide, residential-use label (also sold under distributor brand names): Warning[3]

Lawns it will kill

Use it only on centipedegrass and fine fescue lawns. The label warns that other turfgrasses suffer unacceptable injury or death, and it specifically says not to spray desirable tall fescue.[1]

Bermudagrass and bahiagrass appear on the label as weeds it controls, which is why it can clean grassy invaders out of shrub beds and groundcovers.[1]

Ornamentals and wildflowers

The label lists hundreds of tolerant trees, shrubs, bedding plants and wildflowers, but not every cultivar has been tested. Try it on a few plants first; in wildflower plantings, spray 4 to 6 weeks after emergence and before bloom.[1]

Where it is used

Spray small, actively growing grass weeds; letting them grow past the listed height prevents complete control. Stressed weeds from drought, flooding or temperature swings respond poorly.[1]

A crop oil concentrate or methylated seed oil is required for consistent control; the label says non-ionic surfactants may give unsatisfactory results.[1]

Don't mow centipedegrass or fine fescue within 7 days before or after spraying. Control improves if mowing waits 14 days, and grass weeds regrowing from mowed stubble may be controlled poorly.[1]

It is rainfast after one hour, and treated weeds die over about 3 weeks. Avoid spraying with oil adjuvants above 90°F at 60% humidity or higher, or any time it's over 100°F.[1]

Products and registrations

ProductRegistrantEPA Reg. No.Active %FormulationSignal word
Segment II Herbicide[1]BASF Agricultural Solutions US, LLC7969-39818.0%emulsifiable concentrateWarning
Poast herbicide, residential-use label (also sold under distributor brand names)[3]BASF Corporation7969-5818.0%emulsifiable concentrateWarning

Label rates

ProductUsePestsRate
Segment II HerbicideOrnamentals in residential and commercial landscapes, nurseries, wildflower plantings and noncrop areasCrabgrass, goosegrass, foxtails, barnyardgrass, Japanese stiltgrass, annual ryegrass, bermudagrass, bahiagrass, quackgrass, johnsongrass and other listed grasses0.6–0.9 fl oz product per 1,000 sq ft[1]
0.6 fl oz for grasses up to 6 inches tall and 0.9 fl oz up to 12 inches; crabgrass and goosegrass should be no taller than 4 inches. Always add crop oil concentrate or methylated seed oil.
Segment II HerbicideCentipedegrass and fine fescue lawnsAnnual and perennial grass weeds (not annual bluegrass or rattail fescue)0.4–0.9 fl oz product per 1,000 sq ft[1]
Seedling centipedegrass and fine fescue get 0.4 fl oz (1 pint per acre); mature centipedegrass up to 1.5 pints per acre; fine fescue up to 2.5 pints per acre. Seasonal caps are 2 pints per acre for seedling centipede and 3 pints otherwise.
Segment II HerbicideSpot treatment of scattered grass weedsListed annual and perennial grasses1.3 fl oz product per gallon of water[1]
A 1% solution, sprayed to wet, with 0.6 oz crop oil concentrate or 0.5 oz methylated seed oil per gallon. Don't spot treat on top of a broadcast application.
Poast herbicide, residential-use label (also sold under distributor brand names)Flower and shrub beds, trees, ground covers and listed home fruits and vegetables (Poast residential label)Crabgrass, foxtails, bermudagrass, quackgrass, goosegrass, barnyardgrass, johnsongrass and other listed grassy weeds1 fl oz product per gallon of water[3]
Add 1 fl oz of oil concentrate per gallon. One gallon of spray treats 1,800 sq ft. Up to two applications a season, but one on peanut, root vegetables and strawberry.

How to apply it, step by step

Steps for Poast herbicide, residential-use label (18% sethoxydim concentrate; also sold under distributor brand names), EPA Reg. No. 7969-58, taken from its label[3]. Other products with this active ingredient have their own labels; follow yours.

1. Protective gear

  • It carries the WARNING signal word: it causes substantial but temporary eye injury and skin irritation, and is harmful if absorbed through the skin or swallowed. Keep it out of your eyes and off your skin and clothing.[3]
  • Wear a long-sleeved shirt, long pants, shoes and socks, protective eyewear, and chemical-resistant gloves made of any waterproof material. Wash your hands with soap and water after handling it and before eating, drinking, chewing gum, using tobacco or using the toilet, and wash contaminated clothing before you wear it again.[3]
  • It contains petroleum distillate and is combustible, so don't use or store it near heat or an open flame.[3]

2. Before you spray

  • It kills grassy weeds only, in and around flowers, bedding plants, evergreens, shrubs, trees and ornamental ground covers, and around the fruits and vegetables the label lists. It doesn't control sedges (including nutsedge), annual bluegrass or broadleaf weeds.[3]
  • Listed grasses include large and smooth crabgrass, giant, green and yellow foxtail, bermudagrass, quackgrass, goosegrass, barnyardgrass, johnsongrass, and seedling tall fescue and orchardgrass, up to 1 foot high. Young, actively growing grass dies more easily than older, well-established grass, which may need a second application.[3]
  • Spray when the grass is actively growing: warm, sunny weather speeds the kill, while cool weather, drought and heat stress slow it. Don't mow or cut off the tops of the grass first, and don't spray if rain is expected within an hour. Calm weather with no rain forecast for 24 hours helps keep it from blowing or washing off.[3]
  • Most ornamentals tested tolerate it, but take care around azaleas (var. snow), Japanese privet, potentilla, snow-in-summer, red oak, white oak and ornamental grasses, which may be damaged if spray touches their leaves. The label notes that red, chewings and hard fescue and dichondra turf tolerate it.[3]
  • On food plants, use it only on the fruits and vegetables in the label's Table 2, never on or around unlisted ones (especially sweet corn), and only with a tank-type sprayer. Nonbearing avocado, date, fig, olive, plum, pomegranate and prune trees can be treated if harvest is more than a year away.[3]
  • It is toxic to aquatic organisms. Don't let it get into or run off into storm drains, drainage ditches, gutters or surface water.[3]

3. Mixing

  • Tank sprayer: mix 1 fl oz (2 tablespoons) of Poast and 1 fl oz (2 tablespoons) of oil concentrate per gallon of water. One gallon treats 1,800 sq ft, and 3 gallons with 3 fl oz of each treat 5,400 sq ft. Don't exceed that rate per gallon.[3]
  • Hose-end sprayer: pour 1 fl oz of Poast and 1 fl oz of oil concentrate into the sprayer bottle for each 1,800 sq ft you'll treat, and follow the sprayer's own instructions, including any premixing with water they call for.[3]
  • Leave out the oil concentrate when the temperature in degrees F plus the humidity adds up to more than 150, or it can burn the leaves of the plants you want to keep.[3]

4. Applying

  • Spray just enough to wet the unwanted grass. Over tolerant plants you can spray over the top or direct the spray at the grass itself.[3]
  • For spot treating near lawns or sensitive plants, use a tank sprayer rather than a hose-end one, keep the nozzle as low as works, and keep spray and drift off plants you want. If drift lands on them, wash the leaves with water right away.[3]
  • Around listed vegetables, observe the wait before harvest in Table 2, for example 7 days for strawberries, 14 days for cucumbers, squash, pumpkins and melons, 15 days for green beans, leaf lettuce and spinach, 20 days for tomatoes, peppers and eggplant, and 30 days for head lettuce, potatoes, carrots, broccoli and cabbage.[3]
  • For listed fruits the waits include 14 days for apples and pears, 25 days for peaches and cherries, 45 days for raspberries and blackberries, and 50 days for grapes.[3]
  • Up to two applications a season are allowed on listed plants, but only one on peanuts, root vegetables such as radish, turnip, parsnip and rutabaga, and strawberries. Root vegetables are also marked not for use in California, as are a few other crops in the table.[3]

5. After you spray

  • Keep people and pets off the treated area until the spray has dried.[3]
  • Treated grass stops growing soon after spraying, then turns yellow and dies within one to three weeks, depending on the species, its stage of growth and the weather.[3]
  • Clean the sprayer afterwards: wash a hose-end sprayer with a dilute soap solution and rinse it as its instructions say, or flush a tank sprayer with soapy water and then clean water. Rinsing equipment over the treated area helps keep runoff out of water and drains.[3]

First aid

  • In the eyes, hold them open and rinse slowly and gently with water for 15 to 20 minutes, removing contact lenses after the first 5 minutes. On skin or clothing, take off contaminated clothing and rinse the skin right away with plenty of water for 15 to 20 minutes.[3]
  • If swallowed, call a poison control center or doctor immediately. Don't give the person any liquid, don't induce vomiting unless told to, and give nothing by mouth to an unconscious person. The label's note to physicians says it contains petroleum distillate and that vomiting may cause aspiration pneumonia.[3]
  • If inhaled, move the person to fresh air; if they aren't breathing, call 911 or an ambulance, then give artificial respiration. In each case call a poison control center or doctor, with the container or label at hand. BASF gives emergency medical treatment information at 1-800-832-4357 (HELP).[3]

Storage, spills and disposal

  • Don't let it freeze: store it between 32 and 100 degrees F, in its original container only, out of reach of children and animals, and never pour it into another container for storage.[3]
  • Use it all up according to the label if you can. If not, take leftover product to a waste disposal facility or a pesticide disposal program, often run by state or local governments.[3]
  • The container can't be refilled or reused. Triple rinse it right after emptying (fill it a quarter full of water, recap, shake for 10 seconds and pour the rinse water into your sprayer, three times), then recycle it if available, or puncture it and put it in a sanitary landfill, or follow other procedures your state and local authorities approve.[3]

From the safety data sheet

From the product's safety data sheet[4]. Where it and the label differ, the label is the law.

  • BASF's safety data sheet uses the GHS signal word Danger, while the EPA label uses WARNING. It classes the concentrate as a combustible liquid, an aspiration hazard (it may be fatal if swallowed and it gets into the airways), harmful if inhaled, a skin irritant, a cause of serious eye irritation, possibly causing drowsiness or dizziness, suspected of causing cancer, and toxic to aquatic life with long-lasting effects.[4]
  • Besides the 18% sethoxydim, the sheet lists 67.3% solvent naphtha and 5.6% naphthalene among the ingredients.[4]
  • In rat tests the oral LD50 was 5,000 mg/kg for males and about 4,286 mg/kg for females, the dermal LD50 was above 4,000 mg/kg, and the 4-hour inhalation LC50 was above 7.6 mg/L. It irritated rabbit skin and eyes, and guinea pig tests showed no skin sensitization.[4]
  • Because breathing the hydrocarbon solvent into the lungs raises the risk of chemical pneumonia, the sheet says vomiting should be induced only under professional supervision.[4]
  • For a spill, put out nearby ignition sources, dike it and soak it up with absorbent material, and keep it out of soil, drains and surface water. The sheet says spilled product should be recovered and applied at label rates where possible.[4]

Need the amount for your sprayer? Use the mixing calculator, which works from the same label rates.

Safety and environmental hazards

People

Signal word WARNING: causes substantial but temporary eye injury, causes skin irritation, and is harmful if absorbed through skin or swallowed. Handlers wear coveralls, chemical-resistant gloves and footwear, and protective eyewear.[1]

Pets

The label's hazard statements cover humans and domestic animals, and no one may enter treated areas until sprays have dried. Treated vegetation may not be used as pasture, hay, feed or forage.[1]

Bees and pollinators

The label has no direct bee warning but says it is toxic to plants and can harm the forage and habitat of pollinators next to the treated site if spray drifts.[1]

Fish and water

Toxic to aquatic organisms. Don't apply directly to water or where surface water is present, and don't contaminate water with washwater or rinsate.[1]

Common questions

Will sethoxydim hurt my flowers and shrubs?
It controls grasses only and has been applied to many ornamentals without injury, but the label asks you to test a small group of plants first and use a directed spray near untested species.[1][2]
Can I use Segment II on a St. Augustine or bermuda lawn?
No. The label limits turf use to centipedegrass and fine fescue and lists bermudagrass as a weed it kills.[1]
Does sethoxydim kill nutsedge or broadleaf weeds?
No. It doesn't control sedges or broadleaf weeds; the label's tank mix with Basagran T&O adds yellow nutsedge and broadleaf control in centipede and fine fescue.[1]
Can I use sethoxydim in my vegetable garden?
Yes, on the fruits and vegetables listed in Table 2 of the Poast residential label, with a tank sprayer only, and never on or around unlisted crops, especially sweet corn. Each crop has its own wait before harvest, for example 7 days for strawberries, 20 days for tomatoes and peppers and 30 days for potatoes and carrots.[3]
How much Poast per gallon in a garden sprayer?
1 fl oz (2 tablespoons) of Poast plus 1 fl oz of oil concentrate per gallon of water, which treats 1,800 sq ft. In a hose-end sprayer, use 1 fl oz of each for every 1,800 sq ft, and skip the oil when temperature plus humidity is over 150.[3]

Sources

  1. U.S. EPA Pesticide Product Label System, “Segment II Herbicide label, EPA Reg. No. 7969-398 (EPA-stamped, Sept. 12, 2024).” www3.epa.gov/pesticides/chem_search/ppls/007969-00398-20240912.pdf (accessed 2026-10-06)
  2. Weed Science Society of America, “Summary of Herbicide Mechanism of Action According to the Weed Science Society of America.” wssa.net/wp-content/uploads/WSSA-Mechanism-of-Action.pdf (accessed 2026-10-06)
  3. U.S. EPA Pesticide Product Label System, “Poast herbicide (Section 2, residential use) label, EPA Reg. No. 7969-58 (EPA-stamped, Dec. 3, 2020).” www3.epa.gov/pesticides/chem_search/ppls/007969-00058-20201203.pdf (accessed 2026-11-08)
  4. BASF Corporation (copy hosted by DoMyOwn), “Poast Herbicide Safety Data Sheet (BASF Corporation, version 5.0, revised June 6, 2018; EPA Reg. No. 7969-58, the registration of the page's Poast residential-use label).” www.domyown.com/msds/Poast_SDS.pdf (accessed 2026-11-08)

Updated 2026-11-08. Built from sourced records; every rate traces to a product label. Spot an error? Tell us.