PestControlLibrary
Menu
Active ingredient profile

Pelargonic acid

A fatty acid. The residential directions say it kills weeds and grasses by rapidly causing plant cells to lose water.[1]

Pelargonic acid is a fatty acid herbicide. Scythe Herbicide contains 57% pelargonic acid plus 3% related fatty acids and burns down annual and perennial weeds, grasses and most mosses on contact, with visible effects within hours.[1]

The label is the law. Read your product's label before you mix or apply; the rates here come from the labels listed under Sources.

Active ingredient
Pelargonic acid (nonanoic acid)
Chemical class
A fatty acid. The residential directions say it kills weeds and grasses by rapidly causing plant cells to lose water.[1]
Mode of action
Contact fatty acid herbicide that makes plant cells lose water; it is not named in the WSSA mechanism-of-action summary[1]
Signal word
Scythe Herbicide: Warning[1]

What a contact herbicide can't do

Scythe isn't carried through the plant, so it burns only what it coats. Mature, woody or perennial weeds are harder to control, and roots or rhizomes can send up new growth.[1]

It won't damage woody parts such as rose canes or tree trunks, but any green leaf it drifts onto can be killed. A shield helps when spraying beside plants you want to keep.[1]

Where it is used

Spray on a sunny day above 60 degrees for the fastest kill. Cool weather slows it down, and you should delay spraying if rain is expected within an hour.[1]

Wet every leaf evenly, but stop before the spray runs off. Shake or agitate the sprayer often, because the product separates quickly without mixing.[1]

Young weeds under 6 inches die fastest at the low rate. Use the higher rates for tall or dense weeds and for biennial or perennial weeds.[1]

You can replant as soon as the weeds are dead, since it leaves no soil activity. New seedlings and regrowth will need another spray.[1]

Products and registrations

ProductRegistrantEPA Reg. No.Active %FormulationSignal word
Scythe Herbicide[1]Gowan Company, LLC10163-32557.0%emulsifiable concentrateWarning

Label rates

ProductUsePestsRate
Scythe HerbicideAround ornamentals, trees, flowerbeds, sidewalks, fences, patios, driveways, home greenhouses and dormant turfAnnual weeds, mosses, perennial weed foliage, unwanted grasses4–13 fl oz product per gallon of water[1]
Use 4 to 6.5 fl oz per gallon for annual weeds and mosses, 6.5 to 9 fl oz for perennial weeds, and 9 to 13 fl oz for edging or maximum burndown. One gallon of mix covers about 200 sq ft.

How to apply it, step by step

Steps for Scythe Herbicide (57% pelargonic acid emulsifiable concentrate), EPA Reg. No. 10163-325, taken from its label[1]. Other products with this active ingredient have their own labels; follow yours.

1. Protective gear

  • This is a WARNING-signal product: it causes substantial but temporary eye injury and skin irritation and is harmful if inhaled or absorbed through the skin.[1]
  • For home and landscape use, wear a long-sleeved shirt and long pants, chemical-resistant gloves (barrier laminate, nitrile or neoprene rubber) and goggles, a face shield or safety glasses; don't breathe the spray mist.[1]

2. Before you spray

  • It is a contact, non-selective burndown herbicide: it burns only the green plant parts the spray coats, has no residual effect, and won't damage mature woody (non-green) bark.[1]
  • Keep spray and drift off plants you want, and keep it off water.[1]

3. Mixing

  • Mix with water: 4 to 6.5 fl oz per gallon for annual weeds and mosses, 6.5 to 9 fl oz for perennial weeds, and 9 to 13 fl oz for edging or maximum burndown.[1]

4. Applying

  • Spray for complete, even coverage of the weeds; a gallon of mix covers about 200 sq ft.[1]
  • Repeat as needed for new seedlings and regrowth, since it doesn't prevent weeds from coming back.[1]

5. After you spray

  • Effects show within hours; cool weather afterward slows it.[1]
  • Keep unprotected people out until the sprayed area is dry, and clean the tank, pump and lines thoroughly with water after use.[1]

First aid

  • In the eyes, rinse slowly and gently for 15 to 20 minutes, removing contact lenses after the first 5 minutes; on skin or clothing, take off contaminated clothing and rinse for 15 to 20 minutes; if inhaled, move the person to fresh air.[1]
  • If swallowed, call a poison control center or doctor right away and don't induce vomiting unless told to: it contains petroleum distillates. The label lists 1-888-478-0798.[1]

Storage, spills and disposal

  • Keep it tightly sealed in its original container in a dry place children and pets can't reach.[1]
  • Don't reuse the empty container: rinse it three times (¼ full of water, shaken 10 seconds, rinse water added to the sprayer).[1]

From the safety data sheet

From the product's safety data sheet[2]. Where it and the label differ, the label is the law.

  • The concentrate is a colorless to yellow liquid with a waxy odor and a flash point above 200 degrees Fahrenheit; a container may vent or rupture in a fire, and a direct water stream on hot liquid can erupt violently.[2]
  • Store it in a dry place in the original, tightly closed container, away from food.[2]
  • Soak up small spills with clay, dirt or sand, sweep them up and put them in labeled containers.[2]
  • It carries a WARNING: it may cause severe eye irritation and corneal injury, irritates skin, and can irritate the nose, throat and lungs.[2]

Need the amount for your sprayer? Use the mixing calculator, which works from the same label rates.

Safety and environmental hazards

People

Signal word WARNING: causes substantial but temporary eye injury and skin irritation, and is harmful if inhaled or absorbed through the skin. Wear long sleeves, long pants, chemical-resistant gloves and goggles or safety glasses.[1]

Pets

Keep people, pets and livestock off treated areas until the spray has dried. Store the container somewhere dry that children and pets can't reach.[1]

Bees and pollinators

The Scythe label has no bee or pollinator statement. It burns only the green plant parts the spray touches.[1]

Fish and water

Don't apply it directly to water or where surface water is present, and don't contaminate water when rinsing equipment.[1]

Common questions

How fast does pelargonic acid kill weeds?
The residential label says you'll see results in minutes and dead weeds within hours: green tissue darkens, then browns and dies.[1]
How much Scythe do I mix per gallon?
4 to 13 fl oz per gallon of water, depending on the weeds. The lowest rate handles annual weeds and moss, and the top rate is for edging.[1]
Does Scythe stay in the soil?
No. The label says it has no residual soil activity and won't move through soil to nearby plants, so it won't stop new weeds from sprouting.[1]

Sources

  1. U.S. EPA Pesticide Product Label System, “Scythe Herbicide label, EPA Reg. No. 10163-325 (EPA-stamped, Oct. 17, 2014).” www3.epa.gov/pesticides/chem_search/ppls/010163-00325-20141017.pdf (accessed 2026-10-06)
  2. Gowan Company, “Scythe Herbicide Material Safety Data Sheet (Gowan Company, revised April 2, 2013; copy hosted by distributor DoMyOwn).” www.domyown.com/msds/Scythe%20Herbicide%20MSDS.pdf (accessed 2026-10-16)

Updated 2026-10-16. Built from sourced records; every rate traces to a product label. Spot an error? Tell us.