The label is the law. Read your product's label before you mix or apply; the rates here come from the labels listed under Sources.
- Active ingredient
- Metaflumizone (CAS 139968-49-3)
- Chemical class
- Semicarbazone; IRAC Group 22B voltage-dependent sodium channel blocker, a nerve-action group whose other subgroup, 22A, holds indoxacarb.[2][1]
- Mode of action
- IRAC Group 22B: Voltage-dependent sodium channel blockers: semicarbazones[2][1]
- Signal word
- Siesta Insecticide Fire Ant Bait: Caution[1]
Keeping bait away from water
Broadcast spreading is not allowed within 10 feet of lakes, rivers, streams, marshes, natural ponds or brackish water. Active mounds inside that buffer can still get the individual mound treatment.[1]
Sweep up or cover any spilled granules and keep them out of drains and open water.[1]
Freshness and rotation
Siesta is formulated in an oil bait. Air exposure can turn the oil rancid and make it less attractive to ants, so the label says to use an opened container within 3 months.[1]
Rotate Group 22B baits with fire ant products from other IRAC groups to slow resistance, as the label recommends.[1][2]
Where it is used
Put bait out when ants are foraging: early morning or late afternoon, with temperatures above 60°F. Skip soggy ground, heavy dew, or days with heavy rain expected within 12 hours.[1]
Don't water the granules in. Wait at least 12 hours before irrigating, since rain soon after application can weaken results.[1]
Leave the mound undisturbed while baiting, and hold off on contact insecticides for 7 days so workers can carry the bait home.[1]
Control can last up to 8 weeks or longer. If it seems to fade, reapply after 4 to 8 weeks, staying within 4 applications a year.[1]
Products and registrations
| Product | Registrant | EPA Reg. No. | Active % | Formulation | Signal word |
|---|---|---|---|---|---|
| Siesta Insecticide Fire Ant Bait[1] | BASF Corporation | 7969-232 | 0.063% | granular oil bait | Caution |
Label rates
| Product | Use | Pests | Rate |
|---|---|---|---|
| Siesta Insecticide Fire Ant Bait | Lawns, turf, landscaped areas, golf courses, parks, school grounds and outdoor areas around homes and other buildings | Imported and native fire ants | 2–3 oz product per 5,000 sq ft[1] That works out to 1 to 1.5 pounds per acre with a hand-held, walk-behind or motorized spreader. Around buildings, sprinkle a band about 1 to 2 feet wide along the foundation. |
| Siesta Insecticide Fire Ant Bait | Individual fire ant mounds, including mounds among container-grown plants | Imported and native fire ants | 1–2 oz product per mound[1] That is 2 to 4 level tablespoons scattered evenly 3 to 4 feet around the mound, never on top. Treat no more than 12 mounds per acre at one time. |
How to apply it, step by step
1. Protective gear
- The label requires no gear for home use, but the bait is harmful if absorbed through the skin or swallowed and repeated contact can cause skin allergies: avoid touching it, and wash your hands with soap and water afterward.[1]
2. Before you spray
- It is a fire ant bait: workers carry it into the mound and feed it to the queen. Use it outdoors on lawns, landscapes and around homes, at the first sign of fire ant activity.[1]
- Don't spread it when the ground is saturated, under heavy dew, or when heavy rain is expected within 12 hours; ants feed best above 60°F, in early morning or late afternoon.[1]
- Keep broadcast applications 10 feet from ponds, lakes, streams and marshes (treat mounds in that buffer individually), and keep spilled granules out of drains and water. Keep animals away from the granules.[1]
3. Mixing
- No mixing: it goes out dry. Use it within 3 months of opening, since air turns the oil bait rancid and less attractive.[1]
4. Applying
- Broadcast 2 to 3 oz per 5,000 sq ft with a hand-held, walk-behind or motorized spreader set for that rate.[1]
- For single mounds, scatter 1 to 2 oz (2 to 4 level tablespoons) evenly in a ring 3 to 4 feet around the mound without disturbing it or putting bait on top; treat no more than 12 mounds per acre at one time.[1]
- Around buildings, sprinkle a band about 1 to 2 feet wide along the foundation.[1]
- Don't exceed 4 applications or 6 lb per acre in a year.[1]
5. After you spray
- Don't water it in, and wait at least 12 hours before irrigating.[1]
- Wait 7 days before using a contact insecticide on the same area. Control can last 8 weeks or more; reapply after 4 to 8 weeks if it fades, or sooner if rain fell within 12 hours of application.[1]
First aid
- On skin, take off contaminated clothing and rinse for 15 to 20 minutes; in the eyes, rinse gently for 15 to 20 minutes, removing contact lenses after the first 5.[1]
- If swallowed, call a poison control center or doctor right away, have the person sip water if they can swallow, and don't induce vomiting unless told to. BASF's 24-hour line is 1-800-832-4357.[1]
Storage, spills and disposal
- Keep it tightly closed in its original container in a cool, dry place, preferably locked, out of reach of children and animals.[1]
- Clean up spilled granules and keep them out of drains and water; don't dump leftover bait.[1]
From the safety data sheet
- The bait is yellow granules with a mild vegetable-oil odor and a flash point around 350 degrees Fahrenheit (176.7 degrees Celsius); fine dust from the granules can ignite explosively near a spark or flame.[3]
- Keep it in the original container in a cool, dry, well-ventilated place away from heat, flame, food and animal feed, and don't let it get hotter than 104 degrees Fahrenheit (40 degrees Celsius).[3]
- Pick up spilled granules and apply them at label rates if you can; otherwise contain them for disposal, and keep spills out of drains, surface water and groundwater.[3]
- It may cause an allergic skin reaction; if it gets on skin, wash with plenty of soap and water, and call a poison center if a rash develops.[3]
- Metaflumizone is harmful to aquatic life with long-lasting effects and acutely very toxic to honey bees.[3]
Safety and environmental hazards
People
Signal word CAUTION: harmful if absorbed through skin or swallowed, and may cause moderate eye irritation. Prolonged or repeated skin contact may cause allergic reactions in some people, so wash hands after handling.[1]
Pets
The label says to avoid direct exposure of animals to the granules. It allows use where horses and llamas are kept, provided they aren't used for food.[1]
Bees and pollinators
The label has no bee or pollinator statement; the product is a granular bait for ants.[1]
Fish and water
Toxic to fish and aquatic invertebrates. Metaflumizone can build up in aquatic and land animals and may affect reproduction in birds, mammals, reptiles and amphibians if misused.[1]
Common questions
- How does metaflumizone kill a fire ant colony?
- Worker ants pick up the bait and carry it into the mound as food. It is eaten and fed to the queen, and the label says the mound is then destroyed.[1]
- How much Siesta per mound?
- 1 to 2 ounces, or 2 to 4 level tablespoons, spread 3 to 4 feet around the mound rather than on top.[1]
- Can I water after putting down fire ant bait?
- Not right away. The label says not to water the granules in and to wait at least 12 hours before irrigating.[1]
Sources
- U.S. EPA Pesticide Product Label System, “Siesta Insecticide Fire Ant Bait label, EPA Reg. No. 7969-232 (EPA-stamped, July 22, 2020).” www3.epa.gov/pesticides/chem_search/ppls/007969-00232-20200722.pdf (accessed 2026-10-06)
- Insecticide Resistance Action Committee, “IRAC Mode of Action Classification Scheme, Version 11.5 (Feb. 2026).” irac-online.org/documents/moa-classification/ (accessed 2026-10-06)
- BASF Corporation, “Siesta Insecticide Fire Ant Bait Safety Data Sheet (BASF Corporation, revised August 20, 2018; copy hosted by the Orange County Mosquito and Vector Control District).” ocvector.specialdistrict.org/files/7d459b96f/Siesta_SDS.pdf (accessed 2026-10-16)