PestControlLibrary
Menu
Active ingredient profile

Mesotrione

Triketone-type HPPD inhibitor; WSSA Group 27, the group that includes triketones, isoxazoles and pyrazoles.[2][1]

Mesotrione is a WSSA Group 27 herbicide that blocks the plant enzyme HPPD. In Tenacity it controls weeds in turf both before and after they sprout, and treated weeds turn white before they die, which can take up to three weeks.[1][2]

The label is the law. Read your product's label before you mix or apply; the rates here come from the labels listed under Sources.

Active ingredient
Mesotrione (CAS 104206-82-8)
Chemical class
Triketone-type HPPD inhibitor; WSSA Group 27, the group that includes triketones, isoxazoles and pyrazoles.[2][1]
Mode of action
WSSA Group 27: HPPD (p-hydroxyphenyl pyruvate dioxygenase) inhibitors (triketones)[2][1]
Signal word
Tenacity Herbicide: Caution[1]

Using it when seeding a lawn

Tenacity can go down right before or after seeding tolerant grasses, at 0.115 to 0.184 fl oz per 1,000 sq ft, to hold back weeds that slow new turf. It may thin fine fescue seedings, so use it only on blends under 20% fine or hard fescue.[1]

Don't spray newly germinated grass. Wait until the new turf has been mowed twice or is four weeks past emergence, whichever is longer, before a postemergence spray.[1]

Grasses and plants it can hurt

Bentgrass, Poa annua, kikuyugrass, zoysiagrass, seashore paspalum and bermudagrass are sensitive, except for a dormant-bermudagrass winter weed use. Keep spray off roses, daylilies and flower beds, and plant nothing but turfgrass for 18 months after the last application.[1]

Where it is used

For preemergence use, it needs 0.15 inch of rain or irrigation within 10 days to activate. For weeds already up, add a non-ionic surfactant and plan a second spray 2 to 3 weeks later.[1]

Expect temporary whitening of the lawn itself 5 to 7 days after spraying, lasting several weeks. A second application to the same spot causes less whitening.[1]

Crabgrass and goosegrass respond best postemergence when they have fewer than 4 tillers. Young, actively growing weeds die more reliably than mature or drought-stressed ones.[1]

Don't use clippings from treated turf as mulch around trees or in vegetable or flower gardens, and avoid spraying over exposed tree roots.[1]

Products and registrations

ProductRegistrantEPA Reg. No.Active %FormulationSignal word
Tenacity Herbicide[1]Syngenta Crop Protection, LLC100-126740.0%suspension concentrate (4 lb mesotrione per gallon)Caution

Label rates

ProductUsePestsRate
Tenacity HerbicideEstablished turf and new seedings of Kentucky bluegrass, tall fescue, centipedegrass, buffalograss and other listed grassesCrabgrass, goosegrass, yellow foxtail, nutsedge, clover, chickweed, dandelion, ground ivy, wild violet, creeping bentgrass, nimblewill and other listed weeds0.092–0.184 fl oz product per 1,000 sq ft[1]
Equal to 4 to 8 fl oz per acre. Cap perennial ryegrass and fine fescue at 0.115 fl oz per 1,000 sq ft (5 fl oz per acre) and St. Augustinegrass sod at 0.092. No more than 16 fl oz per acre per year, with at least 14 days between sprays.
Tenacity HerbicideSpot treatment of weeds in tolerant turfListed broadleaf and grassy weeds0.5 tsp product per gallon of water[1]
The label's spot mix is 1 teaspoon of Tenacity and 3 teaspoons of non-ionic surfactant in 2 gallons, sprayed at 1 gallon per 1,000 sq ft.

How to apply it, step by step

Steps for Tenacity Herbicide (40% mesotrione), EPA Reg. No. 100-1267, taken from its label[1]. Other products with this active ingredient have their own labels; follow yours.

1. Protective gear

  • Wear a long-sleeved shirt and long pants, shoes and socks, and chemical-resistant gloves (such as nitrile or butyl rubber at least 14 mils thick); it is harmful if absorbed through the skin and repeated contact can cause skin allergies.[1]

2. Before you spray

  • It controls weeds in tolerant lawns before and after they emerge, and can be used at seeding (except fine fescue, which it may thin).[1]
  • Bentgrass, Poa annua, kikuyugrass, zoysiagrass, seashore paspalum and bermudagrass are sensitive: avoid them unless injury is acceptable. Keep spray off flower beds and gardens (roses and daylilies are sensitive) and off exposed tree and shrub roots.[1]
  • It can run off for months: avoid spraying when rain or irrigation is expected within 48 hours. Don't use an organophosphate or carbamate insecticide within 7 days, or the grass may be injured.[1]

3. Mixing

  • For spot treatment, mix 1 teaspoon of Tenacity and 3 teaspoons of a non-ionic surfactant in 2 gallons of water.[1]
  • For whole lawns, the rate is 0.092 to 0.184 fl oz per 1,000 sq ft (4 to 8 fl oz per acre); perennial ryegrass and fine fescue are capped at 0.115 fl oz per 1,000 sq ft. Add a non-ionic surfactant for weeds that are already up.[1]

4. Applying

  • Spray the spot mix at about 1 gallon per 1,000 sq ft, on young, actively growing weeds.[1]
  • Weeds that have emerged need a second application 2 to 3 weeks later; wait at least 14 days between sprays and don't exceed 16 fl oz per acre per year.[1]
  • On new lawns, apply at or close to seeding; postemergence sprays on new seedlings wait until the grass has been mowed twice or 4 weeks after emergence, whichever is longer.[1]

5. After you spray

  • Keep people and pets off the lawn until the spray dries, then water lightly before going back to normal irrigation.[1]
  • Treated weeds turn white and may take up to three weeks to die; the lawn itself may whiten for several weeks starting 5 to 7 days after spraying, less so with a repeat application.[1]
  • Don't plant anything but turfgrass in treated soil for 18 months.[1]

First aid

  • On skin or clothing, take off contaminated clothing and rinse for 15 to 20 minutes; in the eyes, rinse gently for 15 to 20 minutes, removing contact lenses after the first 5; if inhaled, move the person to fresh air.[1]
  • If swallowed, call a poison control center or doctor right away, have the person sip water if they can swallow, and don't induce vomiting unless told to.[1]

Storage, spills and disposal

  • Keep it tightly closed, away from seed, fertilizer, food, heat and flame; it tolerates temperatures as low as -20°F.[1]
  • Don't reuse the empty container; rinse it three times and add the rinse water to the sprayer before disposal.[1]

From the safety data sheet

From the product's safety data sheet[3]. Where it and the label differ, the label is the law.

  • The concentrate is a beige to tan liquid with a faint, pleasant odor and a flash point above 200 degrees Fahrenheit; it can burn in a fire and give off toxic vapors.[3]
  • Mix, store and apply spray solutions only in plastic, plastic-lined steel, stainless steel or fiberglass containers; contact with galvanized or carbon steel, aluminum, brass or cast iron can form flammable hydrogen gas.[3]
  • Store it in a well-ventilated, secure place out of reach of children and animals, away from food and drinks.[3]
  • Contain spills so they don't reach soil, drains or water, cover them with absorbent, scrub the area with detergent, and seal the waste in a container for disposal.[3]
  • It causes mild eye and skin irritation, and frequent skin contact may cause allergic reactions in some people; mesotrione is far more toxic to green algae than to fish.[3]

Need the amount for your sprayer? Use the mixing calculator, which works from the same label rates.

Safety and environmental hazards

People

Signal word CAUTION: harmful if absorbed through skin, and prolonged or repeated skin contact may cause allergic reactions in some people. Handlers wear long sleeves, long pants, shoes, socks and chemical-resistant gloves.[1]

Pets

Keep people and pets off treated areas until the spray has dried, then irrigate lightly to move product off the grass blades.[1]

Bees and pollinators

The label has no direct bee toxicity warning, but it notes the product is toxic to plants and can harm forage habitat for pollinators next to the treated site if spray drifts.[1]

Fish and water

Don't apply directly to water. Mesotrione can leach to groundwater in permeable soils with a shallow water table, and it has a high potential to reach surface water in runoff for several months.[1]

Common questions

Why did my weeds turn white after Tenacity?
That's how it works. Treated weeds stop growing, lose their chlorophyll and turn white, and death can take up to three weeks.[1][2]
Can I spray mesotrione when I overseed?
Yes, on the tolerant grasses the label lists, except fine fescue. It can be applied before or after seeding, but not onto freshly sprouted grass.[1]
Is Tenacity safe on St. Augustine or bermuda lawns?
Only partly. The label lists St. Augustinegrass grown for sod at a reduced 4 fl oz per acre, and calls bermudagrass sensitive except when fully dormant.[1]

Sources

  1. U.S. EPA Pesticide Product Label System, “Tenacity Herbicide label, EPA Reg. No. 100-1267 (EPA-stamped, Sept. 28, 2022).” www3.epa.gov/pesticides/chem_search/ppls/000100-01267-20220928.pdf (accessed 2026-10-06)
  2. Weed Science Society of America, “Summary of Herbicide Mechanism of Action According to the Weed Science Society of America.” wssa.net/wp-content/uploads/WSSA-Mechanism-of-Action.pdf (accessed 2026-10-06)
  3. Syngenta Crop Protection, LLC, “Tenacity Material Safety Data Sheet (Syngenta Crop Protection, revised November 7, 2012; copy hosted by distributor DoMyOwn).” www.domyown.com/msds/Tenacity%20Herbicide%20MSDS.pdf (accessed 2026-10-16)

Updated 2026-10-16. Built from sourced records; every rate traces to a product label. Spot an error? Tell us.