The label is the law. Read your product's label before you mix or apply; the rates here come from the labels listed under Sources.
- Active ingredient
- Halosulfuron-methyl
- Chemical class
- Sulfonylurea; WSSA Group 2 ALS (acetolactate synthase) inhibitor.[2][1]
- Mode of action
- WSSA Group 2: ALS inhibitors (sulfonylureas)[2][1]
- Signal word
- SedgeHammer Turf Herbicide: Caution[1]
Seeding, sodding and planting after treatment
Treated lawns can be overseeded with annual or perennial ryegrass or bermudagrass 2 weeks after application. For other seeding, sodding or transplanting woody ornamentals, allow 4 weeks.[1]
Color plants and herbaceous ornamentals may be injured when planted into treated landscape areas, and newly transplanted woody ornamentals need 3 months before they can be treated.[1]
Grasses that tolerate it
Listed tolerant turf includes Kentucky bluegrass, tall and fine fescue, perennial ryegrass, creeping bentgrass, bermudagrass, St. Augustinegrass, centipedegrass, zoysiagrass, bahiagrass, kikuyugrass and seashore paspalum. It is not for golf course putting greens.[1]
Where it is used
Spray once nutsedge has reached the 3- to 8-leaf stage. A second treatment can follow 4 to 6 weeks after the first, with no more than 4 applications a year.[1]
Always add a nonionic surfactant: 2 teaspoons per gallon for small areas. If none is on hand, the label allows 2 teaspoons of common liquid dish detergent instead.[1]
For best results, don't mow for 2 days before or 2 days after treatment, and avoid spraying when rain is forecast within 4 hours.[1]
Use a level scoop, not a rounded one, and skip treatment while the turf or nutsedge is stressed, which can mean turf injury and poor control.[1]
Products and registrations
| Product | Registrant | EPA Reg. No. | Active % | Formulation | Signal word |
|---|---|---|---|---|---|
| SedgeHammer Turf Herbicide[1] | Canyon Group LLC (c/o Gowan Company, LLC) | 81880-1 | 75.0% | water-dispersible granule | Caution |
Label rates
| Product | Use | Pests | Rate |
|---|---|---|---|
| SedgeHammer Turf Herbicide | Small areas of established lawns and turf, or around established woody ornamentals (under 1,000 sq ft) | Yellow and purple nutsedge, green and annual kyllinga, plus listed broadleaf weeds | 0.9 g product per 1,000 sq ft (mixed in 1 gallon of water)[1] That is one level 0.9 gram scoop (0.03 oz) per gallon of water, plus 2 teaspoons of nonionic surfactant. Spray it within 24 hours of mixing. |
| SedgeHammer Turf Herbicide | Larger turf, golf course, landscape, fallow and non-crop areas (over 1,000 sq ft) | Yellow and purple nutsedge, kyllinga and listed broadleaf weeds | 0.67–1.33 oz product per acre[1] That's 2/3 to 1 1/3 oz per acre in 20 to 50 gallons of water with 0.25 to 0.5% nonionic surfactant. Use the low rate for light infestations and the high rate for heavy ones. |
How to apply it, step by step
1. Protective gear
- Wear a long-sleeved shirt and long pants, and shoes and socks; it causes moderate eye irritation and is harmful if swallowed. Wash with soap and water after handling.[1]
2. Before you spray
- It controls purple and yellow nutsedge and some broadleaf weeds in established lawns; spray once the nutsedge has 3 to 8 leaves, and not when grass or sedge is drought- or heat-stressed.[1]
- Don't spray it over flowers, ornamentals, vegetables, shrubs or trees, or into food or vegetable beds.[1]
- Don't mow for 2 days before or after spraying, and avoid spraying when rain is forecast within 4 hours (runoff risk is lowest with no rain or irrigation for 48 hours).[1]
3. Mixing
- For up to 1,000 sq ft, mix one level 0.9-gram scoop (not heaped) in 1 gallon of water, plus 2 teaspoons of an 80% non-ionic surfactant (or, if you don't have one, 2 teaspoons of liquid dish detergent).[1]
- Don't add more surfactant than that; extra can injure the grass.[1]
4. Applying
- Spray the gallon evenly over 1,000 sq ft of nutsedge, or spot-spray individual plants.[1]
- A second treatment can go on 4 to 6 weeks after the first; allow at least 4 weeks between applications and no more than 4 a year (5⅓ oz per acre per year).[1]
5. After you spray
- Treated lawns can be overseeded with ryegrass or bermudagrass after 2 weeks; wait 4 weeks before seeding or sodding other turf or planting woody ornamentals.[1]
- Bedding plants transplanted into treated landscape areas may be injured.[1]
First aid
- In the eyes, hold them open and rinse slowly and gently for 15 to 20 minutes, removing contact lenses after 5 minutes, and call a poison control center or doctor.[1]
- If swallowed, call a poison control center or doctor right away, have the person sip water if they can swallow, and don't induce vomiting unless told to; the label's medical emergency line is 1-888-478-0798.[1]
Storage, spills and disposal
- Store it cool and dry (below 120°F), never in damp conditions.[1]
- Don't reuse the empty container; rinse it three times and add the rinse water to the sprayer. An empty container still holds residue, so handle it carefully until it's disposed of.[1]
From the safety data sheet
- The product is beige granules with a scorched-vanilla odor.[3]
- Store it under cool, dry conditions below 120 degrees Fahrenheit, not in damp places, and keep it away from water, food, feed and seed.[3]
- Sweep, scoop or vacuum up spills, absorb small remaining amounts with an inert material, and flush the area with water.[3]
- It moderately irritates eyes and slightly irritates skin.[3]
- Halosulfuron is practically nontoxic to fish and water fleas but very highly toxic to algae.[3]
Safety and environmental hazards
People
Signal word CAUTION: causes moderate eye irritation and is harmful if swallowed. Applicators wear long sleeves, long pants, shoes and socks, and wash hands before eating or using the toilet.[1]
Pets
The hazard statement for people and domestic animals covers eye irritation and swallowing. For lawn and landscape use, the label's re-entry rule is to keep people off treated areas until the spray has dried.[1]
Bees and pollinators
There is no bee toxicity warning, but the label says the product is toxic to plants and may harm forage and habitat for pollinators near the treated area if spray drifts.[1]
Fish and water
Toxic to non-target vascular plants; don't apply to water or where surface water is present. It can leach to groundwater and run off for months, so avoid spraying when rain or irrigation is expected within 48 hours.[1]
Common questions
- Does halosulfuron kill both yellow and purple nutsedge?
- Yes. The SedgeHammer label lists both yellow and purple nutsedge as controlled, along with green and annual kyllinga.[1]
- Can I spray SedgeHammer in flower beds?
- Only around established woody ornamentals, kept off their leaves. Don't spray it over desirable flowers, vegetables, shrubs or trees, or into food or vegetable beds.[1]
- How many times a year can I use it?
- Up to 4 applications, at least 4 weeks apart, with no more than 5 1/3 oz of product per acre in any 12-month period.[1]
Sources
- U.S. EPA Pesticide Product Label System, “SedgeHammer Turf Herbicide label, EPA Reg. No. 81880-1 (EPA-stamped, Sept. 1, 2026).” www3.epa.gov/pesticides/chem_search/ppls/081880-00001-20260901.pdf (accessed 2026-10-06)
- Weed Science Society of America, “Summary of Herbicide Mechanism of Action According to the Weed Science Society of America.” wssa.net/wp-content/uploads/WSSA-Mechanism-of-Action.pdf (accessed 2026-10-06)
- Gowan Company, “SedgeHammer Material Safety Data Sheet (Gowan Company, EPA Reg. No. 81880-1-10163, revised April 2, 2013; copy hosted by distributor DoMyOwn).” www.domyown.com/msds/Sedgehammer%20MSDS.pdf (accessed 2026-10-16)