The label is the law. Read your product's label before you mix or apply; the rates here come from the labels listed under Sources.
- Active ingredient
- Ammonium nonanoate (pelargonic acid, ammonium salt)
- Chemical class
- A soap product. The label says it penetrates plant cell walls and mixes cell contents, which turns tissue brown.[1]
- Mode of action
- Contact soap herbicide that disrupts plant cells; it is not named in the WSSA mechanism-of-action summary[1]
- Signal word
- AXXE Home and Garden Herbicide (also sold as BioSafe Weed & Grass Killer, BioSafe Weed Control and AXXE Weed Killer): Warning[1]
Burndown, not a root killer
The label says it doesn't move through soil, isn't carried through the plant, and leaves no residual to stop new seedlings. Bigger weeds, perennials and some grasses may need several sprays.[1]
Dandelion, bermudagrass, field bindweed, yellow nutsedge and common ragweed are rated moderately difficult and call for a 13 to 15% mix.[1]
Where it is used
Spray only dry weeds, never ones wet from dew, rain or watering. Don't water within 2 hours afterward, and skip it if rain is expected within 2 hours.[1]
Soak the leaves and stems until spray just starts to run off; complete, even coverage matters. Leaves usually turn brown or black within one to two hours.[1]
Use low pressure, around 10 to 15 psi, to cut foaming and drift. Don't go above a 15% mix in a pressure sprayer.[1]
Keep spray off green leaves, green stems and green bark of plants you want, including young trees and shrubs. A shielded nozzle helps in tight spots.[1]
Products and registrations
| Product | Registrant | EPA Reg. No. | Active % | Formulation | Signal word |
|---|---|---|---|---|---|
| AXXE Home and Garden Herbicide (also sold as BioSafe Weed & Grass Killer, BioSafe Weed Control and AXXE Weed Killer)[1] | BioSafe Systems, LLC | 70299-25 | 40.0% | liquid concentrate | Warning |
Label rates
| Product | Use | Pests | Rate |
|---|---|---|---|
| AXXE Home and Garden Herbicide (also sold as BioSafe Weed & Grass Killer, BioSafe Weed Control and AXXE Weed Killer) | Unwanted vegetation around homes, gardens, ornamentals, turf edges and walkways | Annual and perennial broadleaf weeds, grasses, moss, liverworts and algae | 8–19.2 fl oz product per gallon of finished spray[1] 6 to 8% (8 to 10 fl oz per gallon) for weeds 1 inch or less, moss and liverworts; 8 to 10% for weeds 1 to 4 inches; 10 to 13% (13 to 16 fl oz) for taller or hard weeds. 15% (19.2 fl oz) is the maximum. |
How to apply it, step by step
1. Protective gear
- Wear goggles: this is a WARNING-signal product that causes substantial but temporary eye irritation; it is also harmful if inhaled and irritates skin.[1]
- Avoid breathing the spray mist, keep it off your skin and clothing, and wash with soap and water after handling.[1]
2. Before you spray
- It is a contact herbicide (a soap): it browns any green plant tissue it touches, including green stems and young bark, but doesn't move through soil or stop new seeds sprouting.[1]
- Spray only when the weeds are dry, not when rain is expected within 2 hours, and not while bees are visiting; it is toxic to fish and bees, so keep it out of drains and gutters.[1]
3. Mixing
- Fill the sprayer half full of water, add the concentrate, then add the rest of the water; once mixed it needs no further agitation (hard water may turn it milky, which doesn't matter).[1]
- Strength depends on weed size: about 6 to 8% (8 to 10 fl oz per gallon) for weeds under an inch and for moss and liverworts, 8 to 10% for weeds 1 to 4 inches, and 10 to 13% (13 to 16 fl oz per gallon) for bigger or tough weeds; 15% is the label maximum.[1]
- A hose-end AXXE sprayer mixes it automatically on the Mix setting.[1]
4. Applying
- Spray at low pressure (most nozzles run at 10 to 15 psi), soaking the leaves and stems until the spray just runs off; low pressure also cuts foaming.[1]
- Keep spray off plants you want: use a shield or directed nozzle near garden plants, and avoid green stems and the green bark of young trees and shrubs.[1]
- Repeat as needed for regrowth from roots and newly sprouted seedlings; larger weeds, perennials and some grasses need several treatments.[1]
5. After you spray
- Treated foliage turns brown to black within one to two hours, faster in warm weather.[1]
- Don't water the area for 2 hours after spraying.[1]
First aid
- In the eyes, hold them open and rinse slowly and gently with water for 15 to 20 minutes, removing contact lenses after the first 5 minutes; on skin or clothing, take off contaminated clothing and rinse for 15 to 20 minutes.[1]
- If inhaled, move the person to fresh air and call 911 if they aren't breathing. The label lists the National Pesticide Information Center (1-800-858-7378, 6:30 a.m. to 4:30 p.m. Pacific) and Poison Control (1-800-222-1222) at other times.[1]
Storage, spills and disposal
- Store it in its original container in a cool, well-ventilated place out of direct sunlight; overheating breaks it down. Keep it away from other pesticides and fertilizers.[1]
- Flood a spill with plenty of water. Put an empty container in the trash or recycling; for a partly full one, call your local solid waste agency, and never pour it down a drain.[1]
Safety and environmental hazards
People
Signal word WARNING: causes substantial but temporary eye irritation, so wear goggles. It is harmful if inhaled and causes moderate skin irritation; avoid breathing spray mist and keep it off skin and clothing.[1]
Pets
The label's hazards to humans and domestic animals are the eye, skin and breathing warnings. Don't let the spray contact people directly or through drift.[1]
Bees and pollinators
Toxic to bees exposed to direct treatment or residues on blooming weeds. Don't spray while bees are visiting the area.[1]
Fish and water
Toxic to fish and aquatic invertebrates. Keep it out of storm drains, gutters, ditches and surface water.[1]
Common questions
- Is ammonium nonanoate organic?
- The AXXE Home and Garden label is marked for organic gardening and residential use, and not for food use.[1]
- Will it kill weeds down to the roots?
- No. It is a contact herbicide that isn't carried through the plant, so perennial weeds can regrow from roots or stems and need repeat sprays.[1]
- How much BioSafe Weed & Grass Killer per gallon?
- 8 to 19.2 fl oz per gallon of spray depending on weed size, with 13 to 16 fl oz suggested for most situations.[1]
Sources
- U.S. EPA Pesticide Product Label System, “AXXE Home and Garden Herbicide label, EPA Reg. No. 70299-25 (EPA-stamped, Apr. 12, 2019).” www3.epa.gov/pesticides/chem_search/ppls/070299-00025-20190412.pdf (accessed 2026-10-06)