The label is the law. Read your product's label before you mix or apply; the rates here come from the labels listed under Sources.
- Active ingredient
- Acetic acid
- Chemical class
- An organic acid. The label says foliar contact causes rapid drying out of weeds and that residues break down promptly in soil.[1]
- Mode of action
- Contact acid that dries out plant tissue it touches; it is not named in the WSSA mechanism-of-action summary[1]
- Signal word
- Harris Vinegar Grass & Weed Killer II: Danger[1]
Top-kill, not root kill
Foliar contact controls annual weeds and grasses but only reduces the top growth of perennials. Established perennial weeds may need retreatment whenever new leaves appear.[1]
For big stands, the label suggests mowing to 4 to 6 inches and removing the clippings first, so less product is needed.[1]
Where it is used
Spray weeds when they are small, at the 3- to 5-leaf stage, and actively growing. Wet the foliage thoroughly and don't dilute the product, since dilution cuts its effect.[1]
Spray dry leaves when it's between 50 and 75°F. Hot, dry conditions above 75°F can reduce how well it works.[1]
It kills any plant it touches, including turf around a weed. Keep it off landscape plants and use large-droplet nozzles on calm days.[1]
Rinse it off aluminum, tin, iron, fencing or lawn furniture, and avoid repeated sprays on concrete, which acids can etch. Sprayer nozzles should be plastic or 316 stainless steel.[1]
Products and registrations
| Product | Registrant | EPA Reg. No. | Active % | Formulation | Signal word |
|---|---|---|---|---|---|
| Harris Vinegar Grass & Weed Killer II[1] | P.F. Harris Manufacturing Company, LLC | 3-24 | 20.0% | ready-to-use liquid | Danger |
Label rates
| Product | Use | Pests | Rate |
|---|---|---|---|
| Harris Vinegar Grass & Weed Killer II | Weeds around ornamentals, gardens, walkways, kennels, dog runs, farmsteads and rights-of-way | Young annual broadleaf weeds and grasses; top growth of perennials such as dandelion, Canada thistle, ground ivy, plantain and nutsedge; moss and liverworts | 44–88 fl oz product per 1,000 sq ft[1] That's 1.375 to 2.75 quarts per 1,000 sq ft, so one gallon covers about 1,450 to 2,900 sq ft. Use the higher volume for dense weeds. Spray undiluted, except for liverworts: 1 gallon of product to 2 gallons of water. |
How to apply it, step by step
1. Protective gear
- This is a DANGER-signal product: it is corrosive and causes irreversible eye damage, so wear goggles or a face shield.[1]
- The label's gear list for anyone handling or applying it: protective eyewear, an N95, R95 or P95 face mask, a long-sleeved shirt and long pants, waterproof gloves, and shoes plus socks.[1]
- Wash the gear with detergent and hot water, separately from other laundry, and wash your hands before eating, drinking or using the toilet.[1]
2. Before you spray
- It kills or injures any plant it touches, so don't let spray or drift reach lawn grass, garden plants or crops; never spray it directly onto food crops.[1]
- Don't spray when the wind would carry it off target, and keep it off aluminum, tin, iron, metal fencing and lawn furniture (rinse with water if it lands there); repeated spraying on concrete can etch it.[1]
- Spray when weeds are small (3 to 5 leaves) and actively growing, on dry leaves at 50 to 75°F; it works less well above 75°F in dry air.[1]
- Don't apply it directly to water, or when birds are visiting the area.[1]
3. Mixing
- Use it full strength: diluting it makes it less effective.[1]
- The one exception is liverworts, where the label dilutes 1 gallon of product with 2 gallons of water.[1]
- Use plastic or 316 stainless steel spray nozzles; the acid eventually corrodes other metals.[1]
4. Applying
- For spot treatment, spray the unwanted weeds until the foliage is thoroughly wet, using a single nozzle or a hand sprayer.[1]
- For larger patches the label uses 44 to 88 fl oz per 1,000 sq ft (one gallon covers about 1,450 to 2,900 sq ft), using the higher amount for dense weeds, at no more than 35 psi.[1]
- For big annual weeds and established perennials, mowing to 4 to 6 inches and removing the clippings first cuts how much product you need; spray again when new leaves appear.[1]
5. After you spray
- Keep people without protective gear out of the sprayed area until it has dried; the label sets a 48-hour restricted-entry interval for workers.[1]
- Only the plants the spray touched are affected; perennial weeds often regrow and may need another treatment.[1]
- Around food crops it may be applied up to two days before harvest, directed at weeds only.[1]
First aid
- In the eyes, hold the eyelids open and flush gently with water for 15 to 20 minutes, removing contact lenses after the first 5 minutes, and call a poison control center or doctor.[1]
- On skin or clothing, take off the contaminated clothing and rinse the skin with plenty of water for 15 to 20 minutes.[1]
- If swallowed, call a poison control center or doctor right away, have the person sip water if they can swallow, and don't induce vomiting unless told to.[1]
- If inhaled, move the person to fresh air and call 911 if they aren't breathing; the label also lists 1-800-858-7378 for emergency medical treatment information.[1]
Storage, spills and disposal
- Keep it from freezing, in its original tightly sealed container, out of children's reach, and away from water, food and feed.[1]
- The jug is refillable with acetic acid only; don't reuse it for anything else. To empty it for disposal, pour the rest into your sprayer, then rinse it three times with water (about 10% full, shaken for 2 minutes) and add the rinse water to the sprayer.[1]
Safety and environmental hazards
People
Signal word DANGER: corrosive and causes irreversible eye damage. It is harmful if absorbed through skin or swallowed. Wear goggles or a face shield, an N95-type mask, long sleeves, long pants, waterproof gloves, shoes and socks.[1]
Pets
Keep unprotected people out of treated areas until the spray has dried. The label allows use in kennels, dog runs and other animal enclosures.[1]
Bees and pollinators
The label has no bee warning. It does say the product is toxic to birds, so don't spray when birds are actively visiting the area.[1]
Fish and water
Toxic to fish and aquatic invertebrates. It is for land use only; don't apply directly to water.[1]
Common questions
- Is 20% vinegar weed killer the same as kitchen vinegar?
- This product is 20% acetic acid, equal to 200-grain vinegar, and is labeled not for human consumption. It carries a DANGER warning for irreversible eye damage.[1]
- Will vinegar weed killer kill weeds permanently?
- It reliably controls young annuals, but on perennial weeds it mainly burns back top growth, so repeat sprays may be needed.[1]
- How much area does a gallon cover?
- About 1,450 to 2,900 sq ft, at 44 to 88 fl oz per 1,000 sq ft.[1]
Sources
- U.S. EPA Pesticide Product Label System, “Harris Vinegar Grass & Weed Killer II label, EPA Reg. No. 3-24 (EPA-stamped, Sept. 14, 2022).” www3.epa.gov/pesticides/chem_search/ppls/000003-00024-20220914.pdf (accessed 2026-10-06)